Technical data

Module 9
Modifying Application Test Definitions
9-40
Auto Analysis Setup
The 2
nd
Auto Analysis Setup
1
2
3
4
5
6
Idrain=Id@Vth*Polarity
1. Display the Test Contents screen.
2. Click the Analysis Setup tab.
3. Highlight the Auto Analysis icon.
4. Hit Insert button.
5. Check the box of Interpolation Mode.
6. Check the box of Enable. Then enter Idrain=Id@Vth*Polarity to find the constant current Vth.
The 2
nd
Auto Analysis is set in this slide.