User`s guide

10 Agilent 16440A User’s Guide, Edition 5
User's Guide
Installation
Installation
This section describes how to attach the selector to Agilent 16442A test fixture or to
a shielding box.
To Attach the Selector to Test Fixture
You can attach your selector to the 16442A test fixture. You need a standard
screwdriver.
NOTE If you use the 16445A selector adapter, fix it under the selector by similar method.
1. Place the selector on your workbench. 2. Place the test fixture on top of the selector.
3. Position a plate on both sides. 4. Attach each plate using the three flathead
screws supplied with the instrument.