Specifications

1 kHz (Milliohm) Various Components

16143-60011 Mating Cable

Terminal Connector: 4-Terminal, BNC

Cable Length (approx.): 60 cm

Weight (approx.): 220 g

Description: The 16143-60001 is designed to operate

specifically with the 4338B. It is used to connect any com-

bination of two test lead types to the 4338B.

Applicable Test Leads: 16005-60011, 16005-60012/14,

16006-60001, 16007-60001/2

16005-60011 Kelvin Clip Leads

DUT Connection: 4-Terminal

Cable Length (approx.): 40 cm

Weight (approx.): 40 g

Description: The 16005-60011 is useful when measuring

test devices that have large terminals. It incorporates the

Four-Terminal (Kelvin) connection method for accurate

low resistance measurements. The jaws of the 16005-

60011 are a set of electrically independent contacts. The

current terminal feeds the test current to the DUT while

the voltage terminal detects the voltage across the DUT.

Furthermore, the contact design assures accurate mea-

surement down to the lowest resistance range.

DUT Size: See figure below

16005-60012/14 Kelvin IC Clip Leads

DUT Connection: 4-Terminal

Cable Length (approx.): 40 cm

Weight (approx.): 20 g

Description: The 16005-60012/14 is useful when mea-

suring test devices that have thin leads. It incorporates

the Four-Terminal (Kelvin) connection method for

accurate low resistance measurements. The jaws of the

16005-60012/14 are a set of electrically independent con-

tacts. The current terminal feeds the test current to the

DUT while the voltage terminal detects the voltage across

the DUT. Furthermore, the contact design assures accu-

rate measurement down to the lowest resistance range.

DUT Size: See figure below

Black Clip (16005-60014)

Red Clip (16005-60012)

DUT Dimensions