Specifications

59
16197A Bottom Electrode SMD
Test Fixture
Terminal Connector: 7 mm
DUT Connection: 2-Terminal
Electrical Length: 14 mm
Dimensions (approx.): 160(W) x 70(H) x 86(D) [mm]
Weight (approx.): 300 g
Additional Error:
f: frequency [GHz]
E4991A with 16197A
Up to 3 GHz (7 mm) SMD
Description: This test fixture is designed for impedance
evaluations of bottom electrode SMDs. It achieves stable
frequency characteristics up to 3 GHz and provides highly
repeatable measurements. This test fixture supports vari-
ous SMD sizes, as small as 1005 (mm)/0402 (inch) and as
large as 3225 (mm)/1210 (inch). Accommodation of the
0603 (mm)/0201 (inch) size is available with option 001.
Applicable Instrument: 4287A, 4294A + 42942A,
4395A with Opt. 4395A-010 + 43961A, 4396B with
Opt. 4396B-010 + 43961A, E4991A
When used with 16085B: 4263B, 4268A, 4279A*, 4284A*,
4285A, 4288A, E4980A, E4981A
* denotes the instrument is obsolete.
Frequency: DC to 3 GHz
Maximum Voltage: ±40 V peak max (AC +DC)
Operating Temperature: -55°C to +85°C
DUT size: See figure and table below:
Furnished Accessories:
Type of error Impedance
Proportional Error 1.2 x f
2
[%]
Open Repeatability 2 + 30 x f [µS]
Short Repeatability 30 + 150 x f [mΩ]
DUT Dimensions
Description P/N Qty.
Operation and Service Manual 16197-90000 1
Blank Device Guide 16197-25006 1
Magnifying Lens 16193-60002 1
Tweezers 8710-2081 1
Wrench N/A 1
Carrying Case 16197-60050 1
Case for Shorting Devices 1540-0692 1
Short Plate See below
See below
Standard Option Applicable SMD size
SMD Size Code L x W [mm] H [mm]
3225 (mm)/1210 (inch) (3.2±0.15) x (2.5±0.15) H ≥ 0.4
3216 (mm)/1206 (inch) (3.2±0.15) x (1.6±0.15) H ≥ 0.4
2012 (mm)/0805 (inch) (2.0±0.15) x (1.25±0.15) H ≥ 0.4
1608 (mm)/0603 (inch) (1.6±0.15) x (0.8±0.15) H ≥ 0.4
1005 (mm)/0402 (inch) (1.0±0.1) x (0.5±0.1) H ≥ 0.4
Option 16197A-001 Applicable SMD size
SMD Size Code L x W [mm] H [mm]
0603 (mm)/0201 (inch) (0.6±0.03) x (0.3±0.03) H ≥ 0.25
Test fixture overview