Specifications

Up to 110 MHz (4-Terminal Pair) Other Components

16089E Kelvin Clip Leads

Terminal Connector: 4-Terminal Pair, BNC

DUT Connection: 4-Terminal

Cable Length (approx.):

1m (from connector to clip's tip)

Weight (approx.): 260 g

Additional Error: The additional error is

negligible when compared to the instrument's

accuracy.

Description: This test fixture can measure lead compo-

nents with low impedance. It has excellent repeatability

and low contact resistance. It is equipped with two insu-

lated Kelvin clips.

Applicable Instruments: 4263B, 4268A, (4284A*,

4285A, 4288A, 4294A, E4980A, E4981A)**

* denotes the instrument is obsolete.

** applicable in a limited frequency range.

Frequency: 5 Hz to 100 kHz

Maximum Voltage: ±42 V peak max (AC+DC)

Operating Temperature: 0°C to 55°C

DUT Size: See figure below

Furnished Accessories:

Compensation and Measurement: Open and short

compensations are recommended before measurement.

For open compensation, do not connect the Kelvin clips to

anything. Short compensation is performed by holding a

shorting plate with the Kelvin clips. After performing

open and short compensations, the DUT is held with the

Kelvin clips.

Description P/N Qty.

Operation Note 16089-90001 1