Specifications

46 Chapter 6
Making Distortion Measurements
Measuring Harmonics and Harmonic Distortion with a One-Button
Measurement
Making Distortion Measurements
Figure 6-6 Measuring the Harmonic Distortion
The amplitudes of the harmonics are listed relative to the fundamental
frequency.
NOTE An asterisk (*) appearing next to the total harmonic distortion value
indicates that the ideal resolution bandwidths for one or more
harmonics could not be set. These harmonics for which the resolution
bandwidths could not be set are flagged with an asterisk beside their
amplitude value. The measurement is still accurate as long as the
signal has little or no modulation.
Step 9. Exit out of the harmonic distortion measurement:
Press
MEASURE, Meas Off.