User`s guide
14
General Information
Specifications
Specifications
Specifications for the 11970 Series Mixers are listed in Table 1-1 on page 15 through Table 1-7 on
page 21.
NOTE Supplemental information is included only as additional information; they are not
specifications. Nominal values indicate expected performance or describe product
performance that is not covered by the product warranty.
Environmental Limitations
The 11970 Series Mixers meet or exceed the environmental requirements of MIL-T-28800C, Type III,
Class 3, Style C. Specific environmental qualifications for the mixers are as follows:
Temperature, Non-operating: -40oC to 75oC
Temperature, Operating: 0oC to 55oC
Relative Humidity: 95 ±5% (up to 30oC)
Altitude, Non-operating: Less than 12,195 meters (40,000 ft.)
Altitude, Operating: Less than 3,048 meters (10,000 ft.)
Maximum Vibration Levels: 2 G's at 5 to 2000 Hz
Maximum Shock: 30 G's
NOTE Unless otherwise stated, all specifications apply for an IF range of 300 to 322.5
MHz as required by the various spectrum analyzers covered in this user’s guide.
Also, the specifications only apply with RF input levels of less than −20 dBm.