Technical data

Chapter 3 61
Front and Rear Panel Features
Rear-Panel Features
Front and Rear Panel Features
Rear-Panel Features
Item Description
# Name
1 Battery
Compartment
Location of the two batteries that provide DC power to the analyzer.
2
DC Power The input for the dc power source. Refer to “Power Requirements” on page 27.
3
USB, Type A
Allows connections of external devices such as an external memory device.
4
USB, Type B
Allows connections of external devices such as a PC controller. (not implemented)
5
Timing LAN A TCP/IP Interface for connecting internal options to external devices.
6
LAN A TCP/IP Interface.
• For information on setting the IP address, refer to “Turning on the Analyzer for
the First Time” on page 32.
• For information on using the analyzer remotely, refer to the
User’s/Programmer’s Guide.
7
REF OUT
(10 MHz)
An output of the analyzer’s internal 10 MHz frequency reference signal used to lock
the frequency reference of the analyzer to other test equipment.
8
EXT REF IN
Input for an external frequency reference signal. For additional information on
using an external reference, refer to “Using an External Reference” on page 33.
9
EXT TRIGGER
INPUT
A TTL input that accepts the positive or negative edge (selectable) of an external
voltage input that triggers the analyzer internal sweep source.