Technical data

Chapter 1 27
Installation and Setup
Power Requirements
Installation and Setup
Power Requirements
Typically, the only physical installation of your Agilent spectrum
analyzer is a connection to a power source.
WARNING Before operating or connecting this analyzer to an external
power source, please read and understand safety information
in “Safety Information” on page 14 and the safety
considerations and all safety warnings in “Safety
Considerations For This Analyzer” on page 16.
Line voltage does not need to be selected.
This analyzer does not contain customer serviceable fuses.
NOTE If your test system requires a common ground, use the grounding lug
provided on the back of the instrument.
NOTE For detailed analyzer specifications, see the Specifications guide.
NOTE In addition to operating the analyzer on AC power using the external
AD/DC converter, you can operate it using internal batteries. For
information on the installation and use of those batteries, refer to
Chapter 11, “Working with Batteries,” on page 167.
AC Power Cord
The analyzer is equipped with a three-wire power cord, in accordance
with international safety standards. This cord connects to the external
power supply adapter and grounds the external power supply when
connected to an appropriate power line outlet. The cord appropriate to
the original shipping location is included with the analyzer.
Table 1-1 AC Power Requirements
Description Specifications
Voltage 90 to 132 Vrms (47 to 440 Hz)
Voltage 195 to 250 Vrms (47 to 66 Hz)
Power Consumption, On < 115 W
Power Consumption, Standby < 7 W