Technical data

Chapter 10 159
Basic System Operations
Configuring for Network Connectivity
Basic System Operations
information for the analyzer to be recognized. Contact your network
administrator if you do not have this information.
5. Press IP Address.
6. Enter the IP address using the knob or the up and down arrows, and
menu keys on the left.
7. Press Ok
8.
Press Net Mask
9.
Enter the Net Mask using the knob or the up and down arrows, and
menu keys on the left.
10. Press Ok
11.
Press Gateway
12.
Enter the Gateway using the knob or the up and down arrows, and
menu keys on the left.
13. Press Save, Yes. Saves the current configuration.
14. Cycle the power of the analyzer to access the network and have valid
network information assigned.