Service manual

7-10 11713 Operating and Service Manual

Replacing Major Assemblies

A3 Latch Assembly Removal/Replacement

CAUTION This module contains components that can be damaged or destroyed by

electrostatic discharge. It should be serviced at a static-safe

workstation. Refer to "Preparing a Static-Safe Work Station" in

Chapter 8.

To Remove the A3 Latch Assembly

1. Remove the top cover.

2. With a strong upward motion, lift the orange ring at the top edge of

the A3 latch assembly.

To Replace the A3 Latch Assembly

1. Gently insert the board into the socket marked A3 latch assembly

with a vertical motion. Apply balanced pressure with your thumbs to

push the board into the socket.

2. Replace the top cover.