Technical data

1100 Series DAD and MWD Reference Manual 169
Repairing the Detector 4
16 Replace the leak pan into the cabinet bottom.
Next steps:
• Reconnect the leak sensor cable to the processor board
(J21).
• Replace the optical unit, see “Installing the Optical Unit
(G1315A/G1365A)” on page 171 or “Installing the
Optical Unit (G1315B/G1365B)” on page 173.
• Replace the front cover, top cover and top foam section,
see “Replacing the Foam and the Top Cover” on
page 175.
• Replace the detector into the stack.
• Reconnect the cables.
• Turn on the detector.