User`s guide

Displaying Data 2
Agilent 1000 Series Oscilloscopes User’s Guide 47
To specify a bandwidth limit
When high frequency components of a waveform are not important to its
analysis, the bandwidth limit control can be used to reject frequencies
above 20 MHz. See Figure 20 and Figure 19.
1 If the channel’s menu is not currently displayed, press the channel key
([1], [2], [3], or [4]).
2 In the Channel menu, press BW Limit to toggle the bandwidth limit
setting “ON” and “OFF”.
Figure 19 BW Limit Control OFF
Bandwidth limit OFF