User`s guide

Getting Started 1
Agilent 1000 Series Oscilloscopes User’s Guide 27
The definitions of the front panel knobs, keys, and softkeys are as follows:
Front Panel Overlays for Different Languages
If you choose a language option other than English, you get a front panel
overlay for your language option.
To install a front panel overlay:
1 Insert the tabs on the left side of the overlay into the appropriate slots
on the front panel.
2 Gently press the overlay over the knobs and buttons.
3 When the overlay is against the front panel, insert the tabs on the right
side of the overlay into the slots on the front panel.
4 Let the overlay flatten out. It should remain secure on the front panel.
Table 3 Front Panel Controls
Controls Consists of these knobs and keys
Measure controls [Measure] and [Cursors] front panel keys.
Waveform controls [Acquire] and [Display] front panel keys.
Menu controls [Save/Recall] and [Utility] front panel keys.
Vertical controls Vertical position knobs, vertical scale knobs, channel ([1], [2], etc.)
[Math], and [REF] front panel keys.
Horizontal controls Position knob, [Menu/Zoom] front panel key, and scale knob.
Trigger controls Trigger [Level] knob, [Menu], and [Force] front panel keys.
Run controls [Run/Stop] and [Single] front panel keys.
Setup controls [Auto-Scale] and [Default Setup] front panel keys.
Softkeys Five gray keys from top to bottom on the right-hand side of the
screen, which select the adjacent menu items in the currently
displayed menu.
entry knob For the adjustment defined controls.