User`s guide

Getting Started 1
Agilent 1000 Series Oscilloscopes User’s Guide 19
Step 2. Turn on the oscilloscope
The next few steps (turning on the oscilloscope, loading the default setup,
and inputting a waveform) will provide a quick functional check to verify
the oscilloscope is operating correctly.
1 Connect the power cord to a power source.
Use only power cords designed for your oscilloscope.
Use a power source that delivers the required power (see Table 16 on
page 149).
2 Turn on the oscilloscope.
WARNING
To avoid electric shock, be sure the oscilloscope is properly grounded.
Figure 1 Power Switch