User`s guide

Specifications and Characteristics 7
Agilent 1000 Series Oscilloscopes User’s Guide 147
Table 11 Measurement Features
Name Typical Value
Automatic measurements: Measurements are continuously updated. Cursors track last
selected measurement.
Voltage: Peak-to-peak, maximum, minimum, average, amplitude, top,
base, overshoot, preshoot, RMS
Time: Frequency, period, +width, -width, +duty cycle, -duty cycle,
delay rising edge, delay falling edge, phase rising edge, phase
falling edge, rise, fall
Display all: Mode to display all single-channel automatic measurements
simultaneously on the display.
Counter: Built-in 6-digit frequency counter on any channel. Counts up to
the oscilloscope’s bandwidth.
Cursors: Manual, track waveform, or automatic measurement selections.
Manual and track waveform selections provide readout of
Horizontal (X, X, 1/X) and Vertical (Y, Y).
Waveform math: One function displayed selected from A+B, A-B, AxB, and FFT.
Source selection for A and B can be any combination of
oscilloscope channels 1 or 2 (or 3 or 4 on DSO1xx4A only).
Table 12 FFT Measurement Features
Name Typical Value
Points: Fixed at 1024 points
Source of FFT: Oscilloscope channels 1 or 2 (or 3 or 4 on DSO1xx4A only)
Window: Rectangular, blackman, hanning, hamming
Amplitude: Display in dBVrms and Vrms