User`s guide

Oscilloscope Utility Settings 6
Agilent 1000 Series Oscilloscopes User’s Guide 135
To select internal/external mask storage location
1 In the Mask menu ([Utility]>Mask Test>MaskSetting), press Location to
toggle between:
To save a mask
1 In the Mask menu ([Utility]>Mask Test>MaskSetting), press Save.
2 If the External mask storage location has been selected, use the Disk
Manager to name and save the mask file. See “Using the Disk Manager”
on page 118.
To recall a mask
1 In the Mask menu ([Utility]>Mask Test>MaskSetting), press Recall.
2 If the External mask storage location has been selected, use the Disk
Manager to select and load the mask file. See “Using the Disk Manager”
on page 118.
To export/import masks
1 Because you can only export and import masks from an external drive,
select the External mask location. See “To select internal/external mask
storage location” on page 135.
2 In the Mask menu ([Utility]>Mask Test>MaskSetting), press Imp./Exp..
3 Use the Disk Manager to select the file and import or export the mask.
See “Using the Disk Manager” on page 118.
Internal Masks are saved and loaded from oscilloscope internal
memory.
External Masks are saved, loaded, exported, and imported from an
external USB drive.
NOTE
When importing a mask while the Location is Internal or when importing or recalling a
mask while the Location is External, the mask is imported or recalled to internal memory.
To activate the mask, you must set the Location to Internal, then Recall from internal
memory.