User`s guide

Agilent 1000 Series Oscilloscopes User’s Guide 13
Figures
Figure 1. Power Switch 19
Figure 2. [Default Setup] Key 20
Figure 3. [Auto-Scale] Key 22
Figure 4. Low Frequency Probe Compensation 24
Figure 5. High Frequency Probe Compensation 25
Figure 6. Front Panel 26
Figure 7. Softkey Menus 28
Figure 8. Oscilloscope Display 30
Figure 9. Run Control Keys 31
Figure 10. [Help] Key 32
Figure 11. Securing the Instrument 33
Figure 12. Horizontal Controls 36
Figure 13. Status Bar, Trigger Position, and Horizontal Scale Control
Indicators 37
Figure 14. Zoomed Time Base Window 40
Figure 15. X-Y Display Format Showing Out-of-Phase Waveforms 41
Figure 16. Vertical Controls 43
Figure 17. DC Coupling Control 46
Figure 18. AC Coupling Control 46
Figure 19. BW Limit Control OFF 47
Figure 20. BW Limit Control ON 48
Figure 21. Waveform Before Inversion 51
Figure 22. Waveform After Inversion 51
Figure 23. Math Scale Setting Value 53
Figure 24. FFT Waveform 56
Figure 25. [Display] Key 59
Figure 26. Alaising 67
Figure 27. Theoretical Brick-Wall Frequency Response 68