User`s guide

5 Saving, Recalling, and Printing Data
114 Agilent 1000 Series Oscilloscopes User’s Guide
Saving and Recalling Data
Using the oscilloscope’s [Save/Recall] key, you can save and recall
oscilloscope waveforms and setups, and you can save oscilloscope display
screens and data.
When turning off the oscilloscope after saving or recalling data from an
external USB drive, allow at least five seconds for the data transfer to
complete.
To save and recall waveforms
You can save/recall oscilloscope waveforms and setups to/from 10 internal,
nonvolatile memory locations in the oscilloscope.
You can also save/recall waveforms and setups to an external USB drive
when it is connected to a rectangular USB host port.
1 Press [Save/Recall].
2 In the Storage menu, press Storage.
Figure 48 [Save/Recall] Key
Menu
Zoom
Cursors
Measure
Acquire
Display
Help
Utility
Print
Save
Recall
Default
Setup
Auto-
Scale
Run
Stop
Single
Push
Push
Push
for Zoom
to Zero
for 50%