Operation Manual

System Telephone
ST 30
15
The ST 30 digital value-added telephone is equiped with a separate connection (Western socket) for
a headset. Instead of using the AGFEO Headsets 2100 and 2200 you may also use the following
headsets (Procurement from specialised retailers) :
Manufacturer Model Manufacturer´s order no.
Headset
internal ISDN-connection
of the
telecommunications
system
Headset
Receiver
Headset-socket
Connecting the headset
The western socket for the headset-connection is found on the underside of ST 30. The socket is
marked with a receiver-symbol.
- Insert the headset-plug in the headset-socket until it audibly clicks into place.
- Lay the headset-cable in the cable channel on the underside of
ST 30 to ease tension.
- To release the headset-cable, press (if necessary with a small screw-driver) the hook of the
western plug in the direction of the plug itself at the same time pulling out the cable-plug.
Sockets on the underside of the ST 30 digital system telephone
Module shaft
Plantronics Supra Monaural Polaris Model P51 *
Tristar Model P81 *
* with subscriber´s cable U10P
GN Nordkom Profile monaural **
Optima NC monaural **
* with subscriber´s cable U10P
32190-04
33695-01
38058-01
1861-15-03
1913-29-01
800-00-01
The cordless AGFEO Headset 9120 may also be operated with the optional available HS Module 30.