Specifications

7
1280C GB 20001204
Safety precautions
General safety instructions
■ The Classic E.O.S. was designed for processing medical X-ray films, and should
only be used for this purpose.
■ The processor may only be operated by qualified staff, skilled on the machine.
■ Make sure that only by Agfa authorized personnel has access to the processor.
■ Only trained and authorized service personnel can make repairs or changes to
the processor.
■ If there is visible damage to the machine casing, the processor should not be
started or used.
■ Do not override or disconnect the integrated safety features.
■ Disconnect the processor from the mains before performing any maintenance
activities.
■ Like all technical devices, the processor must be operated, cared for and ser-
viced correctly, as described in the documentation provided with the machine.
■ If the processor is not operated correctly or if you do not have it serviced cor-
rectly, Agfa is not liable for resulting disturbances, damages or injuries.
■ When installing the processor, care must be taken to ensure that there is either a
mains plug or an all-cable disconnecting device in the internal installation fitted
near the processor and that it is easily accessible.
■ If connections with other components or assemblies are made, Agfa can guaran-
tee safety only for combinations which are approved by Agfa.
■ If you notice conspicuous smoke or noise, disconnect the processor immedi-
ately.