Specifications

43
1280C GB 20001204
Fixer replenishment rate
The default setting is 400 ml/m².
You can try to increase the rate if fog-level, speed and contrast of the film is
affected. Keep in mind that changing the fixer replenishment rates can result in
bad archival quality.
Setting the fixer replenishment rate
1 Press any key to start.
❖
You can press the Escape key at any time to quit a menu without making changes.
2 Press the Confirm key to select ‘Settings’.
3 Press the Down key three times followed by the Confirm key to select ‘Replen-
ishment’.
4 Press the Down key two times followed by the Confirm key to select ‘Rates’.
The fixer replenishment rate is not adjustable during film processing.
6HWWLQJV Æ
/DQJXDJH Ç

'U\HU Æ
5HSOHQLVKPHQW Ç
5DWHV