Specifications

40
1280C GB 20001204
Developer replenishment rate
The developer replenishment rate must be set in accordance with the amount of
film that is processed. The Classic E.O.S. allows for surface scanning of film,
taking into account not only the film length but also the film width.
The default setting is 400 ml/m².
Refer to the table for recommended developer replenishment rates, depending
on your specific workload.
Developer replenishment rate
more than 5 m² film/day 3 to 5 m² film/day less than 3 m² film/day
daily use irregular use daily use irregular use daily use irregular use
400 ml/m² 400 ml/m² 600 ml/m² 600 ml/m² 600 ml/m² 600 ml/m²
Related setting: Standby developer and fixer replenishment - jog cycle
more than 5 m² film/day 3 to 5 m² film/day less than 3 m² film/day
daily use irregular use daily use irregular use daily use irregular use
OFF OFF OFF OFF ON ON
Related setting: Start-up replenishment function
more than 5 m² film/day 3 to 5 m² film/day less than 3 m² film/day
daily use irregular use daily use irregular use daily use irregular use
OFF ON OFF ON OFF ON
The developer replenishment rate is not adjustable during film processing.
If you do not comply with the recommended replenishment rates, the opti-
mal processing stability is no longer guaranteed and sensitometric varia-
tions might occur.