Specifications

30
1280C GB 20001204
Customizing the processing parameters
Overview
The following processing parameters can be set to optimize the sensitometric
stability of the system.
It may be possible that all parameters settings are password protected, except
for the dryer setting. Refer to qualified service personnel if settings need to be
changed and a password must be entered.
Processing parameter Default setting Refer to
Processing cycle. RP 34
Developer temperature. 34 °C
36
Dryer setting.
(Default stage 05 for RP and IP; 07 for HT)
Stage 05 38
Developer replenishment rate. 400 ml/m
2
40
Fixer replenishment rate. 400 ml/m
2
43
Standby developer and fixer replenishment
(jog cycle).
AUTO
45
Setting the start-up replenishment function. Deactivated
47
Language.
Country
specific
49
Autofill. OFF
50