Specifications

17
1280C GB 20001204
Switching the Classic E.O.S. on
Before switching on
❖ When operating the processor for the first time, make sure that the processor has
been installed in accordance with the Agfa installation instructions.
1 Make sure the machine is connected to the power supply.
2 Make sure all drain valves are closed by turning clockwise.
3 Make sure the water tap is opened.
4 Make sure the chemical tanks are filled.
5 Make sure all covers are properly installed and that the interlock switches are
engaged.
6 Make sure the feed table and exit tray are clean.
7 Make sure the ground fault switch is not switched off.