Specifications

109
1280C GB 20001204
Electrical connection
Operating voltage 200 - 240 V
Mains fuse protection 15/16 A
Mains frequency 50/60 Hz
Power consumption
Standby (room temperature ~ 20 °C) 0.25 kWh
During film processing 2.1 kWh (max. 3.45 kWh)
Environmental conditions
Relative humidity 10 % - 80 %
Room temperature
(without cooling system)
10 °C - 30 °C
Room temperature (with cooling system) 10 °C - 35 °C
Recommended consumables
Developer G 138 i
Fixer G 334 i/G 338
Film all Agfa medical X-ray films
Water tap water
Tank volumes (with roller sets inserted)
Developer tank ca 8.8 l
Fixer tank 1 ca 10 l
Fixer tank 2 ca 5.8 l
Water tank ca 5.8 l
Developer temperatures (default values upon installation)
RP processing cycle 34 °C
IP processing cycle 37 °C
HT processing cycle 38 °C