Specifications

48
The Structurix ECO Film System
combines both economy in use and
ecological responsibility. This
advanced film system minimizes its
impact on the environment with less
chemistry consumption, higher film
throughput and lower energy usage.
Choose from the Structurix Film System
in 5 minute cycle (NDT S ECO) or the
Structurix Film System in
8 minute cycle (NDT S ECO/M ECO).
Both are specially designed to meet the
strictest standards for silver content in the
wash water. The secret lies in the double
xing tank with which the system is
equipped. This cascade xing system
ensures that the amount of silver in the
wash water remains within the limit of
<50 mg/m
2
. Additionally the Structurix
S ECO allows signicant reduction in the
chemistry replenishment rate.
Structurix Chemicals
Thanks to the intelligent composition of
the chemicals, Structurix ecoDEV and
ecoFIX, it is possible to reduce the chemistry
consumption to less than 60 percent of
the present reference levels while
maintaining excellent sensitometric and
Structurix ECO Film System
physical characteristics. This drastic
reduction in chemistry consumption
translates into lower purchasing costs,
while the smaller volume of developer and
xer waste leads to lower disposal costs.
In fact, the higher concentration of silver
in the xer waste actually turns an
expenditure item to an income item,
thanks to silver recovery.
Structurix ecoDEV
The ecoDEV is a new two-part developer
for universal use but specially designed
for super fast processing, with the lowest
possible replenishment rates while
maintaining optimum developing
capabilities. The hardener-free and
boron-free ecoDEV has a minimal impact
on the environment.
Replenishment rate 5 min. cycle:
550 ml/m
2
(S ECO)
Replenishment rate 8 min. cycle:
900 ml/m
2
(S ECO/M ECO).
The use of the starter solution, ecoSTART,
is highly recommended when lling the
developer tank. In this way, optimal
sensitometric results are ensured from
the start.
Structurix ecoFIX
The ecoFIX is a new boron-free, two-part
xer specially designed for super fast
processing, with the lowest possible
replenishment rates while rendering
improved archiving results.
Replenishment rate: 700 ml/m
2
(S ECO
and M ECO).
Structurix ECO Chemicals
Structurix S ECO Structurix lms D2 to D8
Structurix M ECO