Specifications

45
The new Structurix ECO Chemicals are
an important link in the total Structurix
ECO Film System.
Thanks to the intelligent composition of the
chemicals, ecoDEV and ecoFIX, it is
possible to reduce chemistry consumption
up to 60 percent, compared to the present
reference levels while maintaining
excellent sensitometric and physical
characteristics. This signicant reduction
in chemistry consumption translates into
cost savings, as the smaller volume of
developer and xer required leads to less
waste volume and lower disposal costs.
The ECO chemicals, ecoDEV and ecoFIX,
have the intrinsic qualities and benets of
standard Structurix chemicals and,
therefore, provide excellent results in
combination with any Structurix
processor.
EcoDEV and ecoFIX have the same dilution
as G135 and G335, allowing use of the
current NDT MIXER without modication.
Structurix ecoDEV
The Structurix ecoDEV is a new two-part
developer suitable for standard processing
in the 8 minute cycle but specically
designed for super fast 5 minute processing.
EcoDEV is glutaraldehyde-free and
boron-free, reducing its impact on the
environment. This is especially true when
processing is in the 5 minute cycle in
combination with the NDT S ECO
processor. This combination has the
lowest possible replenishment rate while
delivering optimal developing capabilities.
EcoDEV is packed in a shipping carton
containing two sets of part A (5 litres) and
part B (0.5 liters) concentrate. One set is
sufcient for preparing 20 litres of
ready-to-use developer. Each carton
contains four bottles.
The ecoDEV developer enables you to
develop your lms at a lower temperature
in the standard 8 minute processing cycle,
resulting in less evaporation of the
chemicals.
Structurix ecoSTART
Structurix ecoSTART is a new one-part
starter solution to be added to ecoDEV
ready-for-use solution.
Whenever you replace the ecoDEV
developer, we recommend use of
ecoSTART starter solution to ensure lm
images with optimal sensitometric results
right from the start.
EcoSTART is packed in a shipping carton
containing 4 sets of 1 litre bottles.
Structurix ecoFIX
The Structurix ecoFIX is a new two-part
xer for universal use but specially
designed for super fast processing, with
the lowest possible replenishment rates
while rendering improved archiving
results.
EcoFIX is boron-free. Due to the lower level
of aluminum sulfate, the risk of precipitation
is reduced drastically, ensuring good lm
quality and consistent repeatability.
EcoFIX is packed in a shipping carton
containing two sets of part A (5 litres bottle)
and part B (1.25 litre bottle) concentrate.
One set of part A & B is sufcient for
preparing 20 liters of ready-for-use xer.
Structurix ecoFIX can be used for manual
processing. For manual usage, one set of
concentrate is enough to prepare 25 litres
of ready-for-use solution.
Recommended Use Of ecoSTART
Processing
Time
Immersion
Time
Quantity
To Be Added
5 min.
cycle
62.5 sec. 25 ml per Litre Fresh
ecoDEV Solution
8 min.
cycle
100 sec. 20 ml per Litre Fresh
ecoDEV Solution
Recommended Use Of ecoDEV
Processing
Time
Immersion
Time
Temp.
(°C)
Replenish-
ment Rate
5 min.
cycle
62.5 sec. 29° C 550 ml/m
2
8 min.
cycle
100 sec. 27° C 900 ml/m
2
Recommended Use Of ecoFIX
Processing
Time
Processor Replenishment
Rate
5 min. cycle S ECO 700 ml/m
2
8 min. cycle S ECO
M ECO
700 ml/m
2
8 min. cycle U
NOVA
1200 ml/m
2
Technical Specications - Structurix ECO Chemicals
Automatic Processing Chemicals