Specifications

40
Structurix DRYER
Fast and ecient lm drying
The Structurix DRYER is an
instrument that helps customers
who process films manually. GE
Sensing & Inspection Technologies
now introduces the new optimized
version of the Structurix DRYER.
Fast and ecient lm drying
With the new Structurix DRYER, lms dry
more rapidly than in conventional drying
cabinets. The drying process immediately
starts with no warm-up time needed.
The unit is compact and takes up little
space in either the stationary darkroom or
mobile lab. The lightweight of the Structurix
DRYER makes it easy to move or
transport.
The new Structurix DRYER consists of
state-of-the-art electronics that makes it
easy to operate and service. The new
dryer carries the CE label, GS and USA/
Canada NRTL sign.
Easy to operate
The new dryer can be used worldwide. No
matter were you plan your operations,
the “plug and play” feature allows you to
adapt it to any standard outlet,
accomodating all voltages globally.
Drying temperature and processing time
of the Structurix DRYER can easily be set
and adapted to any circumstance. The
introduction of step-less speed control
enables an even better ne-tuning.
Excellent results
The manually and thoroughly processed
lm rst passes through the wetting tank.
The water comes from a 2.5 liter water
bottle.
Most water is removed from the lm by
means of squeegee rollers prior to the
drying section. The lm is then hot air
dried on both sides and collected in the
adjustable lm tray.
Structurix DRYER
Dimensions Length 60 cm
Length With Extended Receiving Tray 83 cm
Width 63 cm
Height 35 cm
Height With Bottle 45,5 cm
Weight Empty 35 kg
Weight With Storage Tank Filled 88 kg
Weight Empty 24 kg
Full (With Bottle) 27,5 kg
Power Volts 200-240 V / 100-120 V
Ampère 5,0-6,0 A / 10,0-12,0 A
Frequency Hertz 50 Hz / 60 Hz
Consumption Watts 1600 W
Maximum Film Width 37 cm
Technical Specications