Specifications

34
Structurix U
Universal Reliability
The high reliability of our processors
and years of practical experience led
to the development of this unique
processor. Ease of use, ease of
maintenance and the fact that it is
suitable for almost every application
combine to be the main advantages
of the Structurix U.
Universal use
With the Structurix U, you have at your
disposal the most universal processor
from our selection. Structurix U combines
simplicity, reliability and universal use in
one processor. It is specially designed for
customers who use medium-sized
quantities of lm. The Structurix U is very
versatile and processes sheet lm as well
as roll lm.
Oshore use
In response to conditions and the
demanding requirements with regard to
access time, an offshore version of the U
processor is available. This Structurix U
offshore version suits the specic offshore
conditions and satises the demands with
regard to processing time (90 sec.) and
reliability. Easy trouble shooting and
repair make this processor especially
suitable for use on remote sites. Moreover,
the built-in developer cooler allows
operation in warm climates.
Reliable
The Structurix U is a dependable
processor, no matter where installed. Built
with solid components, the construction
uses only simple and modern techniques.
User-friendly
Thanks to its functional design, the
processor operation is easy to control. An
audio and visual signal indicate when the
next lm can be fed into the processor.
The dryer level and the developer
temperature level can be set using simple
steps.
Perfect processing quality
Three infrared drying units ensure uniform
drying, in accordance with the principle of
direct heat absorption. The xer has its
own heater element, which reduces the
xer warm up time considerably. This
temperature control guarantees the lm
archival quality.
Selectable processing cycles
Upon delivery, the Structurix U is set at the
cycle time of 8 minutes. An optional cycle
time from 1.5 to 12 min. can be set quickly
and simply by an approved service
engineer.
Replenishment by area
Forward of the lm feed slot ve rollers
accurately measure the surface area of
the lm. This unique lm area scanning
ensures a more precise economic and
ecologic replenishment operation than if
the lm were only scanned lengthwise.
Automatic daylight feeding
The Structurix U can easily be tted with
the Structurix FEEDER. Just remove the
lm feeding tray in a few seconds and
connect the lm feeding system in its
place. With the FEEDER, you convert the
Structurix U into a practical, automatic
daylight lm feeding system.