Specifications

32
Structurix M ECO
Compact and ecological
The Structurix M ECO is the most
compact processor of the Structurix ECO
Film Systems, suited to applications that
demand the highest image quality while
being ecologically responsible. The
secret lies in the double xing tank, the
cascade xing system - a unique
concept in the tabletop processors
range.
The ease of use and the problemfree
maintenance make the Structurix M ECO
an extremely user-friendly and reliable
processor. It has been designed for
consumers of small and medium
quantity of lm.
ECOlogical Design
The Structurix M ECO lives up to
expectations ecologically with:
• Revolutionary cascade xing
system which reduces the amount of
silver in the waste water by a factor of
5 to 10.
• Reduction of xer replenishment
if the Structurix ecoFix is used.
• Economical water and electricity
consumption.
• Infrared drying reducing the amount of
heat produced in the darkroom to a
minimum.
• Optimal replenishment system as a
result of lm surface scanning.
• Intermediate washing which ensures
that there is hardly any carry-over of
developer, keeping the xer bath in
optimum condition. This system also
prevents development faults occuring
on the lm.
• Design for Recycling
Extra attention has been given to the
selection of the materials in order to
improve the recyclability. Materials or
components which can disrupt the
recycling process are easy removable.
A Recycling-Passport (RP) and
Equipment Information Sheet (EIS) are
available.
Exact Replenishment
The surface area of the lm is measured
accurately on entry by 5 detector rollers.
This unique lm area scanning ensures
a precise economic, ecologic
replenishment operation and reduced
replenishment rates.
Minimal Running Costs
The accurate replenishment, as described
above, implies low chemical consumption.
In addition, during lm processing only an
ecologically justied volume of water is
used and the consumption of electricity is
particularly low due to the infrared drying
system.
Accessories
• Table support
• Replenishment tanks of 30 litres
• Water lter with cartridge
Peripheral equipment
• Structurix Mixer (50 Hz)
Operating diagram:
1 Film feed table
2 Film area scanning
3 Developer tank
4 Intermediate wash area
5 a Fixer tank F1
5 b Fixer tank F2
6 Final wash tank
7 Infrared dryer
8 Film output
9 Film receiving tray
10 Overheating protectors for
developer and xer
8
9
1
2
3 4 5a 5b 6
10
7