Specifications

31
User Comfort
Multifunctional drainage system
The Structurix S ECO is equipped with
threeway drainage valves. This makes it
simple to direct photo-chemicals and
cleaning chemicals to the correct
collection tank. The valves also prevent
the formation of toxic fumes in the waste
chemical collection tank.
Easy maintenance
Structurix S ECO needs only an absolute
minimum of maintenance. The top parts
of the racks are easily removed and
cleaned without having to take the racks
out of the tanks. The Structurix S ECO is
designed and built to facilitate regural
cleaning of the lm sensor rollers on the
feed tray. The rollers can be reached
easily by removing the feed tray. In order
to prevent algae growth, the wash water
is automatically drained when the
machine is switched to “off”.
Intuitive operating panel
The operating panel provides visual
information about the processing
parameters, including the current
processing temperature, cycle time, dryer
setting, replenishment quantities, the OK
indication for lm input and the remaining
cycle time. As bets such a universal
machine, there is a choice of 12 languages
for the display messages. The
temperature of the developer and dryer
can be adjusted incrementally on the
control panel to suit the processing
program chosen.
Unique daylight system
When combined with the Structurix
Feeder, the S ECO becomes a unique and
practical daylight system. The feeder
automatically follows the lm processing
speed of the S ECO processor, even when
the speed is altered. In cases where the
Structurix S ECO is used without a feeder,
an optional light-tight cover can be
ordered.
Accessories
• Light-tight cover
• Darkroom panel
• Two replenishment tanks of 30 litres
with level sensor
• Water lter with cartridge
Peripheral equipment
• Structurix Mixer (50 Hz)
• Structurix Feeder combined with a
Flip-top magazine
The Structurix S ECO has been awarded by
DIBT (Deutsches Institut für Bautechnik)
for its overall quality and performance, a
certicate numbered z-77,41-3.
Operating diagram:
1 Film feed table
a LCD display
b Menu selection
c Increase setting
d Decrease setting
2 Film area scanning
3 Developer tank
4 Intermediate wash tank
5 a Fixer tank F1
5 b Fixer tank F2
6 Final wash tank
7 Removable top rack parts
8 Distribution rollers
9 Infrared dryer
10 Film output
11 Film receiving tray
12 Replenishment pump for developer
13 Replenishment pump for xer
14 a On/off switch
14 b Earth leakage circuit breaker (ELCB)
15 Three-way valves for draining the
machine tanks
16 Overheating protectors for developer
and xer
1
2 3
7
8
9
7
7
4
a
c b d
5a 5b 10
11
14a
14b
12
15
13
6
16
7