Specifications

30
Structurix S ECO
In addition to the unique advantages
of the ‘ECO’ processing technology,
the Structurix S ECO guarantees
several other features. These include
a large capacity, superior image
quality, precise replenishment and
minimum processing costs.
Large capacity
Structurix S ECO can be set to either a 5 or
an 8 minute cycle. In both cases, the
throughput of the S ECO is sufcient to
meet the needs of large lm users or
companies with high production peaks.
When set to the 5 minute cycle, the
Structurix S ECO processes no less than
51 cm of lm per minute or 78 lms per
hour of 35 x 43 cm. In this 5 minute cycle,
the processor forms the basis for the “ECO
Film System”. In such a system, the
Structurix lm, chemistry and processor
are all carefully matched to ensure the
best possible ECOlogical results in terms of
silver in the wash water while ensuring the
lowest chemistry consumption and waste.
Superior image quality
Structurix S ECO is perfectly suited to
applications that demand the highest
image quality. The technology in terms of
rack construction and roller congurations
has proved its worth in previous processors.
A microprocessor provides “smart” control
of all process functions. This results in
perfect, even drying of your lms in all
ambient conditions.
Precise replenishment
The surface area of the lm is measured
accurately on entry by 11 detection
rollers. This unique method of scanning
actually controls the replenishment far
more precisely than a length only
measurement, thus keeping
replenishment usage to an efcient
minimum.
Anti-crystallization cycle
The Structurix S ECO has a “drive cycle” or
“anti-crystallization’ cycle, which in
stand-by mode activates the roller
transport mechanism sporadically for
short periods of time. This cycle keeps the
energy consumption to an absolute
minimum, while avoiding crystallization of
chemicals on the rollers and, therefore,
increases the life of the processor
considerably.
Processing cycles
The microprocessor has seven
pre-programmed processing cycles,
varying between 1.5 to 12 minutes. These
standard cycles can be set quickly and
easily. Simply select the required cycle
time on the display, and the other
processing parameters such as
development temperature, dryer level,
xing temperature and replenishment
rates adjust automatically.
Customized processing
This feature allows you to manually adjust
the processing speed from ve to 12.5
minutes in steps of 30 seconds. Processing
parameters can be locked and protected
by a special password.
Reliable electronics
The Structurix S ECO is equipped with
highly reliable electronics, designed to
give security of operation. All processing
parameters, including temperature, speed,
replenishment quantities and drying
capacity, are controlled by a
microprocessor.