Specifications

24
The Right Packaging for Every Structurix Film
Pb ETE
(Edge-To-Edge)
Edge-to-edge Pb versions are available for
sheet sizes for that lack a VACUPAC
version. A specic advantage of the
edge-to-edge is its double-sided edge.
This feature makes it possible to place the
lm against or between elements of a
work piece easily and accurately. Opening
the edge-to-edge packaging is as simple
as tearing open the wrapper using the
thread included for this purpose, then
removing the lm via the long side. The Pb
edge-to-edge version is designed for
exposures with energies higher than 100
kV and isotopes.
DW ETE
(Edge-To-Edge)
This light-tight, moisture proof and
greaseproof packaging without Pb screen
is ideal for exposures using radiation
energy lower than 100 kV. The envelopes
can be cut easily and taped for use with
odd-shaped angles and corners. The
envelopes are also easy to tape to the
work piece.
ROLLS IN DAYLIGHT PACKAGING
Whether you X-ray pipelines, pressure
vessels, airplanes or storage tanks, with
roll lm packaging you can determine
the length of lm yourself so that your
radiographs can be made in one piece.
Easy to use
Cassettes are unnecessary with ROLLPAC
packaging. The lm is packed in
accordance with the edge-to-edge
system. ROLLPAC can be placed
accurately on the object to be tested (i.e.,
a long weld) or right into the corner of a
ange. ROLLPAC is placed around the
object and attached with adhesive tape.
Identication of the exposure
needs to occur only once. This time saving
ROLLPAC packaging is supplied in a
practical dispenser box.
Opens quickly and easily
The special design of the ROLLPAC
wrapper allows quick and easy opening.
The lm is removed by taking the
non-printed wrapper, together with the
lead screen and the lm in one hand and
the printed wrapper and the other lead
screen in the other. In this way, the lm
can be stripped easily from the packaging.
ROLLPAC in wider formats (>10cm) has a
tear strip on either side of the wrapper.
This enables the lm to be removed from
the packaging easily and quickly.
Length indication on the wrapper
This feature allows you to easily
determine where to cut the lm and also
to see how much lm is left. The lm can
be cut to any length. Cutting should be
done in the darkroom.
Pb ROLLPAC
Light-tight, moisture proof and
greaseproof
The lm is sandwiched between two
0.027 mm lead screens. ROLLPAC
packaging is completely light-tight. The
packaging is resistant to moisture and
grease.
Optimal image quality
Our unique packaging ROLLPAC ensures
that excellent contact between the lm
and lead foil is retained when the media is
applied to spherical or tubular objects,
even those with a small diameter. Because
the screens are only used once, optimal
results are guaranteed.