Service manual
Avantra 36/44 Service Manual
1-10 Mounting
5. While holding the head in this position, work the power cable at the bot-
tom of the boom arm past the first set of guide roller mounting blocks on
the head. Refer to Figure 1-9.
Figure 1-9 Routing the power cable.
➀
–Roller.
➁
–Rear mounting bracket.
➂
–Power cable/connector.
➃
–Head.
➄
–Crane boom.
6. Loop the cable around the guide roller mounting block on the left side as
viewed from above. Refer to Figure 1-9.
2
1
4
5
3