Service manual

Avantra 36/44 Service Manual

1-2 Mounting

1.2 Unpacking the Crane

The crane ships in a single cardboard box attached to a wooden pallet.

Tools: Strap cutters

Steps:

1. Move the packing box to the imagesetter site and place it on the right hand

side of the OLP.

2. Cut the ties around the box. Lift off the top and remove the packing.

3. Lay out and check the contents against the items shown in Figure 1-1.

Figure 1-1 Crane inventory.

➀

–Boom (arm/mast assembly).

➁

–Cassette cable.

➂

–Capture bar.

➃

–Head (rack/cassette crane).

1 2