Service manual

Avantra 36/44 Service Manual
A-2 Specifications
Electrical
Volts: 208-240 VAC
Hertz: 50/60 Hz
Phases: 1, 2 or 3 phases + (neutral) + ground
Load: Maximum 7.0 kW
Operational Specifications
Water connection: 3/4" BSP (0.3-10 bar, max. temp. 110˚ [43˚C])
Drain: 5.3 US Gal. (3 x Ø25 mm, 3 x 20 L/min)
Water consumption: 0.5 US Gal. (0-2 L/min)
Tank capacity:
Developer: 8 US Gal. (30.3L)
Fixer: 8 US Gal. (30.3L)
Water: 8 US Gal. (30.3L)
Temperature range:
Developer: 74 ° -110 ° F (23 ° -43 ° C)
Fixer: 74 ° -110 ° F (23 ° -43 ° C)
Temperature settings, dryer: 86 ° -140 ° F (30 ° -60 ° C)
Material width: Max 37.4" (95 cm)
Min 4" (10.16 cm)