Service manual

Avantra 36/44 Service Manual

3-6 Removal and Replacement

8. Using a phillips screwdriver, remove the four (4) screws on the top and the

two (2) screws on each side of the box. Refer to Figure 3-4.

9. Open the top of the box and disconnect the:

a. Low voltage CPU power connector

b. Power board cable

Refer to Figure 3-4.

Figure 3-4 Electronics box side/top screws and power cables.

➀

–Side screws.

➁

–Four top screws.

➂

–Low voltage and CPU power cables.