Service manual

Avantra 36/44 Service Manual
1-26 Installation
9. Remove the tape from the door at the top of the engine (see Figure 1-6).
Remove the foam from the dryer section.
10. Place the drip tray, trolley and fluid containers under the OLP. Refer to
Figure 1-21.
Figure 1-21 Placing the drip tray, chemistry trolley and fluid containers.
➀–Drip tray. ➁–Chemistry trolley. ➂–Fluid containers.
11. Underneath the engine, cut the tie wraps for the:
• red (developer) hose
• blue (fixer) hose
• grey (water supply) hose
• black and white wires (replenishment sensors)
3
1
2