Service manual

Section IV: On-line Processor
Installation 1-25
5. Attach the top side panel to the left side of the frame. Refer to Figure 1-20.
6. Attach the striker plate to the right side of the frame. Refer to Figure 1-20.
7. Attach the left lower door (hinged) to the right side of the frame. Refer to
Figure 1-20.
8. Attach the right lower door (hinged) to the right side of the frame. Refer to
Figure 1-20.
Figure 1-20 Side covers, striker plate, doors for right side.
➀–Top left side panel. ➁–Bottom left side panel.
➂–Striker plate. ➃–Right side hinged doors (2).
1
4
2
3