Service manual

Avantra 36/44 Service Manual
1-24 Installation
1.5.5 Attaching the Panels and Covers
1. Using phillips head screws and washers, attach the side covers (one [1] on
each side) to the front of the OLP engine. Refer to Figure 1-19.
2. Attach the lower rear panel. Refer to Figure 1-19.
3. Attach the left side panel (bottom). Refer to Figure 1-19.
Figure 1-19 Front, rear and side panels.
➀–Front left side cover. ➁–Front right side cover.
➂–Lower rear panel. ➃–Left side panel (bottom).
4. Attach the developer filter on the left side.
3
2
1
4