Service manual

Section IV: On-line Processor
Installation 1-17
Figure 1-12 Interface cable.
➀–Interface cable.
5. Connect the RJ45 satin cable to the closest port in the OCP.
6. Connect the two cables together, using the RJ45 to DB9 adapter.
7. Check that the cable does not interfere with other components when clos-
ing the cabinet doors.
1.5.3 Connecting The Electrical Supply
CAUTION: Electrical connections and sources must comply with
local electrical codes.
Power Supply 208-240 VAC, 50/60 Hz
1, 2, or 3 phases + (neutral) + ground
(see electrical connection)
Load Max. 7.0 kW (operational mode)
0.4 kW (stand-by mode)
➀