Service manual

Section III: Buffer

Removal and Replacement 2-5

Figure 2-4 Buffer carriage drive motor.

➀

–Motor mounting screws.

➁

–Lead screw.

➂

–Buffer carriage drive motor.

➃

–Electrical connector.

➄

–Electrical wiring P-clips.

Replace:

1. Reverse the procedures above.

2.5 Buffer Roller Driver Motor

The following describes how to remove and replace the buffer roller driver

motor.

Tools Required: 1/4" open end wrench

Remove:

1. Remove the top cover from the buffer.

2. Remove the top side panels.

3. Pull the two power plugs from the driver motor.

NOTE:

Make note of the positioning of the two power plugs (red

and brown) for purposes of replacement.