Service manual

Avantra 36/44 Service Manual
1-18 Installation
23. Plug the wires into the buffer/imagesetter interface board at the four points
shown in Figure 1-16.
Figure 1-16 Attaching the buffer wires to the
buffer/imagesetter interface board.
➀–Buffer to Imagesetter harness opening. ➁–Connector.
➂–Connector. ➃–Connector. ➄–Connector. ➅–Interface board.
NOTE: See the Avantra 36/44 OLP Service Manual , for the OLP
attachment procedures and for attaching the anti-static
wire.
6
4
3
5
2
1