Service manual

Avantra 36/44 Service Manual

1-2 Installation

1.2 Buffer Installation Procedures

1.2.1 Unpacking the Buffer

The buffer ships in a single cardboard box attached to a wooden pallet (see

Figure 1-1).

Tools: Strap cutters, 7/16¨ hex wrench, 9/16¨ hex wrench

Steps:

1. Cut the two (2) straps around the cardboard sleeve and remove the top

cardboard cover. Refer to Figure 1-1.

Figure 1-1 The buffer shipping box.

➀

–Box cover.

➁

–Shipping straps (2).

➂

–Shipping box.