Service manual

Avantra 36/44 Service Manual

4-6 Removal and Replacement

4.6 The Activator Switch

Tools: Phillips head screwdriver, ﬂathead screwdriver

Remove:

1. Using a phillips head screwdriver, remove the three (3) cover screws. Refer

to Figure 4-4.

2. Disconnect the switch connectors. Refer to Figure 4-4.

3. Using a ﬂathead screwdriver, remove the two switch mounting screws.

Refer to Figure 4-4.

Figure 4-4 Activator switch.

➀–Cover. ➁–Three cover screws. ➂–Switch connectors.

➃–Two switch mounting screws. ➄–Activator switch.

Replace:

1. Reverse the procedures above.