Service manual

Section I: Imagesetter
Installation 1-7
Figure 1-3 Preparing to remove the plates, diapers and skis.
➀ –Parts list package. ➁ –Shipping straps. ➂ –Accessory box.
➃ –End support bolts with washers. ➄ –Tool kit. ➅ –End plate. ➆ –Diaper.
9. Cut the two (2) large tie wraps at the center channel, front and back. Refer
to Figure 1-4.
The bottom diaper should fall to the ground.
10. Remove the bottom diaper by sliding it out from either side of the pallet.
Refer to Figure 1-4.
2
1
3
4
7
5
6