Service manual

Avantra 36/44 Service Manual

1-6 Installation

Figure 1-2 Removing the outer shipping crate.

➀

–Shipping straps.

➁

–Top pad.

➂

–Spring clips or bolts.

➃

–Shipping bolts (2 on each side).

➄

–Two crossbars.

6. Remove the parts list and accessory box. Refer to Figure 1-3. Put the acce-

sory box aside for the unlocking and installing procedures.

7. Remove the three (3) bolts at each corner of the end supports. Refer to

Figure 1-3.

The end supports hold the end plates in place.

8. Remove the end plates, one at each end. Refer to Figure 1-3 and Figure 1-4.