Service manual

Avantra 36/44 Service Manual

1-12 Installation

1.5.2 Attaching the Gas Shocks

Tools required: Screwdriver

Steps:

Figure 1-12 Gas shock and bolts.

➀

–Gas shock (one of two).

➁

–Spring bolts (two of four)

1. Screw the threaded end of the gas shock into the bridge mount casting at

the top rear of the bridge. Refer to Figure 1-13.

If necessary, lift the bridge to align the ear with the hole in the bridge

mount casting.

2. Using the spring bolt (see Figure 1-12) and nut provided, attach the ear to

the lower mount casting. Refer to Figure 1-13.