Service manual

Section I: Imagesetter
Diagnostics 3-61
3.4 Remote Diagnostics
This section describes the equipment requirements, modem configuration and pro-
cedures involved in making a remote connection to an Avantra.
3.4.1 Equipment Requirements
A remote connection to an Avantra requires the following equipment.
CAUTION: If equipment used to make the remote connection is
other than that recommended, unpredictable results may occur.
Remote Site Equipment
*
Modem and modem part numbers are subject to change.
**Refer to OMNI Bulletin Board for latest revision of AVDIAG.
Imagesetter Equipment
*Modem and modem part numbers, and power cables are subject to change.
Equipment Part Number
Dolch PC (or equivalent) 78461-501
Modem: Zoom 80007-001
*
Avantra Diagnostic Diskette (AVDIAG) 700594-1003**
Equipment Part Number
Modem: Zoom 80007-001
*
Power Cable (DEC to Modem) 208880-503
9-Pin to 25-Pin Adapter cable 208881-501